Sooner State Valkyrie Riders
May 21, 2012, 04:52:29 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Homepage : Photo Albums : VRCC : VRCC BBS : VRCC Tech : Shoptalk : Classifieds
News: Spring is upon us!
 
Pages: 1 2 [3]
Print
Author Topic: March 11th Spring Wrench/Tech Party  (Read 2951 times)
BIGMACACE
Newbie
*
Posts: 170



View Profile Email
« Reply #30 on: March 06, 2006, 08:29:35 PM »

Scubba,
HHUUMMM! I didn't know you worked here in town. From your post I assume you get off at 6:00 AM. It's just about 130 miles from here to Jim's house (about 2-2 1/2 hours). Either post back here or send me a mail at:
 buster@mmind.net
and we can work out the details. I was planning on leaving here about 7:00 and stopping in Shawnee at the IHOP for breakfast. But if you want to meet up and eat before you leave just give me a place and time and we'll roll if you want too.
Logged
W0QNX
Newbie
*
Posts: 179



View Profile
« Reply #31 on: March 06, 2006, 08:49:58 PM »

Raymond and Rhonda from up north planning to be there. We will probably drive down Friday night and hit all the disco's in OKC first. Might not be sobered up until around noon so don't wait on us.

(hehehehehahahaha)
Logged

aymond
Andover, Kansas
Jim_Orr
Newbie
*
Posts: 406



View Profile Email
« Reply #32 on: March 07, 2006, 06:04:05 AM »

Quote from: "Scott"

Start time is 10am.  I'm sure Jim won't mind if you show up early


Not at all,  I will be here.
Logged

zenindian
Newbie
*
Posts: 27



View Profile
« Reply #33 on: March 07, 2006, 07:41:28 AM »

Still going to do my best to be there to meet everyone
Logged

8 Valk Tourer, black
Scott
Administrator
Newbie
*****
Posts: 1466



View Profile WWW
« Reply #34 on: March 08, 2006, 06:19:00 PM »

Quote from: "W0QNX"
Raymond and Rhonda from up north planning to be there. We will probably drive down Friday night and hit all the disco's in OKC first. Might not be sobered up until around noon so don't wait on us.

(hehehehehahahaha)


So, are we all invited to go out to the Disco's?  I don't want Blackjack to feel left out....

-Scott
Logged

Never underestimate the power of stupid people in large numbers."
Gary
Newbie
*
Posts: 664



View Profile WWW
« Reply #35 on: March 08, 2006, 07:11:25 PM »

Quote from: "Scott"
So, are we all invited to go out to the Disco's?  I don't want Blackjack to feel left out....

-Scott


Speaking of Disco's... At this rate, I think trying to run thru La Veta and Raton passes I'll be singing  oooh, oooh, oooh, oooh, STAYIN ALIVE, STAYIN ALIVE  Sad

After not getting to see the outdoors all day, this is what I crawled out of the office to head home in. Yesterday was beautiful by the way!!!

Thank goodness I brought the laundry in aye? Not looking too good for Friday thru Sunday travel out this way!  :evil:
Logged

W0QNX
Newbie
*
Posts: 179



View Profile
« Reply #36 on: March 08, 2006, 09:00:12 PM »

Quote from: "Scott"
Quote from: "W0QNX"
Raymond and Rhonda from up north planning to be there. We will probably drive down Friday night and hit all the disco's in OKC first. Might not be sobered up until around noon so don't wait on us.

(hehehehehahahaha)


So, are we all invited to go out to the Disco's?  I don't want Blackjack to feel left out....

-Scott


Of course the more the merrier
Logged

aymond
Andover, Kansas
BIGMACACE
Newbie
*
Posts: 170



View Profile Email
« Reply #37 on: March 09, 2006, 09:44:11 PM »

Scubba and I have a small plan. Gonna leave McAlester about 6:30 and ride to Shawnee (up Indian Nation and I40) for breakfast before heading to Jims. We should be at the IHOP in Shawnee (on I40) between 8:00 and 8:30 if anybody wants to meet up and eat with us.
BTW. I've got my few parts I'm bringing, do we need to bring our own tools? I want to change plugs, Air filter, brake & clutch fluids, and new vacume lines. Just basic stuff but if I need to haul tools just let me know before Friday evening. Looking forward to the party. We'll be there about 9:30-10:00-ish.
Logged
Scott
Administrator
Newbie
*****
Posts: 1466



View Profile WWW
« Reply #38 on: March 09, 2006, 10:48:08 PM »

No need to bring tools.  Jim has a good selection, and I'll have my standard array of tools that I carry all the time.

I'll be bringing the mityvac, as well as the Carb sync gauge if I can figure out how to strap the silly thing on the bike.


-Scott
Logged

Never underestimate the power of stupid people in large numbers."
Gary
Newbie
*
Posts: 664



View Profile WWW
« Reply #39 on: March 10, 2006, 12:38:09 PM »

Looks like there won't be any representation from Colorado for wrench day. Snow blowing off and on with winds around 35-45.

Final drive and shaft loaded and all dressed up with no place to go...  :?

At least I was able to try out the new portable shop heater and install my new Progressive 412's this morning.

and so much for trying out the new Kury Stirrups...  :x

I guess it's just as well, my brake pads and speed bleeders still haven't shown up after 2 weeks from Viking. So unless the weather lets up some, Scott will have to eat my infamous Orr Burger.  :cry:
Logged

Scott
Administrator
Newbie
*****
Posts: 1466



View Profile WWW
« Reply #40 on: March 10, 2006, 01:25:53 PM »

Thats a real bummer Gary.  Wish you could have made it!!

I'll be in Stillwater tonight, and in to Jim's place in the morning.  If you are close to Stillwater and want to join us for some dinner tonight(Friday) around 7pm give me a call on my Cell.

And as always if you get lost or need assistance on the way to Jim's place be sure to call!

Cell: 405-684-6342
(for those of you who have my number, please note I have a NEW cell number)

See you all at Jim's on Saturday!

-Scott
Logged

Never underestimate the power of stupid people in large numbers."
Jim_Orr
Newbie
*
Posts: 406



View Profile Email
« Reply #41 on: March 10, 2006, 01:57:45 PM »

If you need any assistance finding my home call me at (405) 258-8432
Logged

Jim_Orr
Newbie
*
Posts: 406



View Profile Email
« Reply #42 on: March 10, 2006, 02:09:57 PM »

Quote from: "Gary"
Scott will have to eat my infamous Orr Burger.  :cry:


Sorry to see you won't be here Gary.  You might be lucky though normally I sell my "Orr Burgers" to the Blazers.
Logged

RumbleBee
Newbie
*
Posts: 424



View Profile Email
« Reply #43 on: March 16, 2006, 12:30:14 PM »

My bike goes in at Maxey's on Wed, 22nd to get the fork seals replaced, again, ... finally. :?
Logged

n excuse is a thin slice of falsehood stretched tightly over a boldface lie.
Jim_Orr
Newbie
*
Posts: 406



View Profile Email
« Reply #44 on: March 16, 2006, 04:10:52 PM »

What kind of deal did you get work out with Maxey's?
Logged

Pages: 1 2 [3]
Print
Jump to: